The Benefits of Using Tubing and Casing Pipe in Oil and gas Exploration and production
Tubing and casing pipe are essential components of oil and gas exploration and production. They are used to transport oil and gas from the wellhead to the surface, and to protect the wellbore from collapse and contamination. The use of tubing and casing pipe offers several benefits, including:
1. Increased Efficiency: Tubing and casing pipe provide a more efficient means of transporting oil and gas from the wellhead to the surface. This reduces the amount of time and energy required to extract the resources.
2. Improved Safety: Tubing and casing pipe provide a secure barrier between the wellbore and the environment, reducing the risk of contamination and wellbore collapse.
casing pipe china high–grade Supplier,casing pipe China good manufacturer,casing pipe wholesale–Price high-quality best China,3. cost Savings: The use of tubing and casing pipe can reduce the cost of oil and gas exploration and production. By providing a more efficient means of transporting resources, the need for additional equipment and personnel is reduced.
4. Enhanced Productivity: Tubing and casing pipe can increase the productivity of oil and gas exploration and production. By providing a secure barrier between the wellbore and the environment, the risk of contamination and wellbore collapse is reduced, allowing for more efficient extraction of resources.
| chemical composition, Mass Fraction (%) | ||||||||||||||
| Grade | C | Mn | Mo | Cr | Ni | Cu | P | S | Si | |||||
| type | min | max | min | max | min | max | min | max | max | max | max | max | max | |
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 |
| H40 | — | — | — | — | — | — | — | — | — | — | — | — | 0.03 | — |
| J55 | — | — | — | — | — | — | — | — | — | — | — | — | 0.03 | — |
| K55 | — | — | — | — | — | — | — | — | — | — | — | — | 0.03 | — |
| N80 | 1 | — | — | — | — | — | — | — | — | — | — | 0.03 | 0.03 | — |
| N80 | Q | — | — | — | — | — | — | — | — | — | — | 0.03 | 0.03 | — |
| R95 | — | — | 0.45 c | — | 1.9 | — | — | — | — | — | — | 0.03 | 0.03 | 0.45 |
| L80 | 1 | — | 0.43 a | — | 1.9 | — | — | — | — | 0.25 | 0.35 | 0.03 | 0.03 | 0.45 |
| L80 | 9Cr | — | 0.15 | 0.3 | 0.6 | 0.9 | 1.1 | 8 | 10 | 0.5 | 0.25 | 0.02 | 0.03 | 1 |
| L80 | 13Cr | 0.15 | 0.22 | 0.25 | 1 | — | — | 12 | 14 | 0.5 | 0.25 | 0.02 | 0.03 | 1 |
| C90 | 1 | — | 0.35 | — | 1.2 | 0.25 b | 0.85 | — | 1.5 | 0.99 | — | 0.02 | 0.03 | — |
| T95 | 1 | — | 0.35 | — | 1.2 | 0.25 b | 0.85 | 0.4 | 1.5 | 0.99 | — | 0.02 | 0.03 | — |
| C110 | — | — | 0.35 | — | 1.2 | 0.25 | 1 | 0.4 | 1.5 | 0.99 | — | 0.02 | 0.03 | — |
| P110 | e | — | — | — | — | — | — | — | — | — | — | 0.030 e | 0.030 e | — |
| Q125 | 1 | — | 0.35 | 1.35 | — | 0.85 | — | 1.5 | 0.99 | — | 0.02 | 0.01 | — | |
| NOTE Elements shown shall be reported in product analysis. | ||||||||||||||
| a The carbon content for L80 may be increased up to 0.50 % maximum if the product is oil-quenched or polymer-quenched. | ||||||||||||||
| b The molybdenum content for Grade C90 Type 1 has no minimum tolerance if the Wall thickness is less than 17.78 mm. | ||||||||||||||
| c The carbon content for R95 may be increased up to 0.55 % maximum if the product is oil-quenched. | ||||||||||||||
| d The molybdenum content for T95 Type 1 may be decreased to 0.15 % minimum if the wall thickness is less than 17.78 mm. | ||||||||||||||
| e For EW Grade P110, the phosphorus content shall be 0.020 % maximum and the sulfur content 0.010 % maximum. | ||||||||||||||
Overall, the use of tubing and casing pipe in oil and gas exploration and production offers numerous benefits, including increased efficiency, improved safety, cost savings, and enhanced productivity.